La boite à astuces!!

Newbie Inscrit le: 10 Juin 2006 Messages: 19

Bonjour a tous, j'ai une catre tv wintv-hvr 1300 qui fonctionne trés bien. Cependant je voudrai faire fonctionner la télécommande qui est avec mais je ne sais pas du tout comment faire.

Si l'un de vous sait la méthode a suivre je suis preneur
sinon pour ma configue :
(sur ma même machine j'ai aussi une bt8x8 qui fonctionne aussi trés bien en même temps)
debian lenny
version 2.6.22-3-686

~$ dmesg | grep bttv
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:0d.0, irq: 21, latency: 32, mmio: 0xeddfe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom indicates model#38106
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video1
bttv0: registered device vbi1
bttv0: PLL: 28636363 => 35468950 .. ok

lspci

00:00.0 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04)
00:0b.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0b.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0b.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 7600 GS (rev a2)

http://lirc.sourceforge.net/remotes/hauppauge/ ?

je sais qu'il y un patch ajouté il y a environ 1 an pour le support de la télécommande de la HVR-1110, il me semble que c'est le même principe que la hvr-1100